Currency
Your basket is empty
 


SCIENCE BODYBOARDS Style Ltd Tri Quad Vent Channel Delta Tail Polypro Core - 2019/20 Model
SCIENCE BODYBOARDS Style Ltd Tri Quad Vent Channel Delta Tail Polypro Core - 2019/20 Model
$499.95

Board Sizes:

Colour Selection:

Board Plug Placement (Black Plug):

Qty
Enter your e-mail address to be notified when product is in stock
Notify Me!
Product Description

Science Bodyboards Style Ltd Tri Quad Vent Channel Delta Tail Polypro Core Bodyboard 2019/20 Model



Designed by Mike Stewart, arguably the most respected and well known wave rider of all time, is the man behind Science Bodyboards.
With over 30 years experience riding the best waves on the planet you can be sure you're getting the best board possible when you ride a Science Board.

The Style (Balance): Balanced Performance
The perfect balance betweeen speed, control and maneuverability. This is a universal design that will work well in all conditions for a wide range of riders.
The style will assist you in 'flowing' your moves together or just as easily loft an air or gouge a carving reverse.

FEATURES
TEMPLATE: Style
CORE: Polypro (PP) Core
Polypro Core is a state of the art engineered bodyboard core. A lightweight core that is fusion formed to create a nucleus that delivers incredible flexural properties,
including instant recoil, added projection, enhanced longitudinal stiffness & awesome compression strength. This core is 100% waterproof.
STRINGER: 1 x RCS Stringer
SLICK: Surlyn by DuPont
DECK: WaveCushion Air 8lb PE

RAILS: 55/45 Double Rails
TAIL: Delta Tail
ADDITIONAL FEATURES: Tension Tech Construction, Nose Thumb Bar, Raised Elbow Pads, Elbow Lock, MS Channels, Slick Mesh, Nose Bulbs, Screened Deck/Slick Print
, Style Deck Heat Stamp


Tech: Tri Quad Vent Concave
The New Tri / Quad Channel Tail combo is a on or off Channel System. It engages when you need it and has a normal ride in cruise mode.The Four Channels are narrow and deep with a flat section in centre to help give you a bit more release when you need it. Push hard on your rail and the quads rip in with hold and drive and combined with the Tri Crescent hooks in the First and Fourth Channel this allows you to turn sharper and still keep the hold and drive your after.
 

STYLE LTD DELTA QUAD FLEX FACTOR - F4

SCIENCE BODYBOARD FLEX FACTOR RATING

You may have noticed your equipment works differently depending on the temperature. The way a board flexes and recoils in warm conditions is different than in the cold. 

Your personal preference for what you consider as optimum flex is unique to where you live and what your local temperatures are. To take the guess work out of which of our boards is softer (generally better for colder conditions) or stiffer (generally better for warmer conditions) and to help you dial in flex we have created the Science Flex Factor. F1 being the stiffest composition we make and F10 being the softest.

If the board indicates a F+ then an ISS Stringer is in place (e.g. F3+) the flex rating becomes a +or- depending on the ISS Stringer being used.

- Science Flex Factor System is only relative to the Science Bodyboard Range and should not be compared to any other Brands. 


BOARD SPECS

Length Nose Width NTWP Tail Thickness
42" 12" 21 1/2" 18 3/8" 18 1/8" 53mm
43" 12 3/8" 22" 18 7/8" 18 1/2" 55mm

Note: All measurements are taken at outside of rail. * NTWP = Nose to Wide Point

Colourways

Black Deck// Black Pinline// Black Rails// Black Slick in 41.5 (Last One) & 42.5 (Last One)
Red Deck// Black Pinline// Red Rails// White Slick in 41.5 (Last One) & 42.5 (Last One)
 

Science Bodyboard's Flex Factor Described by Mike

Science Flex Factor from Mike Stewart on Vimeo.

Reviews (0)
Currently there are no reviews for this product.
Questions
Currently there are no questions for this product.

© 2018 Bodyboard King Pty Ltd. All rights reserved.